Product catalog
SMC / FRP Cable Trench Covers
Molded SMC/FRP covers for cable trenches in substations, solar and wind plants and rail corridors. They are light, non-conductive and rust-free.
Price by written quotation
Include the quantity and destination. Specification and supply details are confirmed for the inquiry.
Key parameters
- Typical width
- About 400–600 mm (500 mm common)
- Typical length
- About 1,000–2,250 mm
- Thickness
- About 50–80 mm by class and span
Technical specifications
| Parameter | Typical value |
|---|---|
| Typical width | About 400–600 mm (500 mm common) |
| Typical length | About 1,000–2,250 mm |
| Thickness | About 50–80 mm by class and span |
| Material | SMC (sheet molding compound) or FRP |
| Surface | Anti-slip texture, lifting holes |
| Standard grade | High-performance grade | |
|---|---|---|
| Option | Pedestrian and light-traffic covers, class A15 to B125. | Vehicle-area covers, class C250 to D400, with thicker sections and ribbing. |
Design references: load classes (with reference to EN 124)
| Parameter | Standard grade | High-performance grade | Conditions |
|---|---|---|---|
| Test load | A15: 15 kN; B125: 125 kN | C250: 250 kN; D400: 400 kN | Test load per class, reference EN 124 |
| Area of use | Pedestrian / cycle areas, verges | Curbside, car parks, carriageways | Class chosen by expected traffic |
| Permanent set | Per EN 124 limits | Per EN 124 limits | Confirmed by test for the selected size and span |
Values outside these ranges: custom designs are available on request.
Listed values are selection references, not ratings for every configuration. The agreed specification identifies the selected dimensions, materials and required evidence. Standards cited here are design references, not certification claims; custom dimensions depend on the product and tooling.
FIBROVX SMC / FRP cable trench covers are compression-molded composite covers for cable trenches and ducts. They replace concrete or steel covers in substations, solar and wind plants, railway and utility corridors where covers must be light to lift, non-conductive, corrosion-resistant and of no scrap value to thieves.
Key highlights: load classes designed with reference to EN 124 (A15 / B125 / C250 / D400); typical cover widths around 500 mm and lengths about 1,000–2,250 mm; anti-slip textured surface; lifting holes and optional locking. Sizes follow your trench drawing.
Key benefits
- Lighter than concrete covers for one- or two-person lifting
- Non-conductive and no scrap value, reducing theft
- No rust or spalling in wet, salty or chemical environments
- Anti-slip molded surface
- Load class selected for pedestrian or vehicle areas
Customization options
- Width, length and thickness to trench drawing
- Load class A15 / B125 / C250 / D400
- Color, surface texture and marking
- Lifting holes, locks, frames and supports
Exact sizes, resin systems, colors and accessories are confirmed at quotation for your drawings and operating conditions. FIBROVX manufactures to order and supports OEM / private-label marking where agreed.
Typical applications
- Substation and switchyard cable trenches
- Solar and wind farm cable routes
- Railway, metro and tunnel cable troughs
- Industrial park and utility corridors
FAQ
Which load class do I need?
Use A15 or B125 for pedestrian areas and C250 or D400 where vehicles may cross. Send trench width and traffic and we propose the class and thickness.
Can covers match an existing trench?
Yes. Send the clear opening, seat width and depth so the cover size and edge detail match your trench.