Product catalog
FRP Pipe Fittings – Elbows, Tees and Reducers
We make FRP elbows, tees and reducers DN10–600 for 0.6/1.0/1.6 MPa piping, matched to our FRP pipe and flanges.
Price by written quotation
Include the quantity and destination. Specification and supply details are confirmed for the inquiry.
Key parameters
- Elbows
- 45° and 90°, DN10–600
- Tees
- Equal and reducing tees, dimensions per catalog table
- Reducers
- Concentric reducers, dimensions per catalog table
Technical specifications
| Parameter | Catalog value |
|---|---|
| Elbows | 45° and 90°, DN10–600 |
| Tees | Equal and reducing tees, dimensions per catalog table |
| Reducers | Concentric reducers, dimensions per catalog table |
| Pressure classes | 0.6 / 1.0 / 1.6 MPa |
| Wall thickness / length | Per DN and pressure class (catalog TH / L tables), e.g. DN100: TH 5.5 mm at 0.6 and 1.0 MPa, 9.4 mm at 1.6 MPa |
| Constructions | FRP; FRP/PVC composite |
Catalog values are design and selection references. Final dimensions, laminate and performance are confirmed in the quotation for your operating conditions. Standards are named as design references, not certification claims.
FIBROVX FRP pipe fittings — 45° and 90° elbows, equal and reducing tees, and concentric reducers — are filament-wound or contact-molded to match our FRP pipe and flanges in corrosive and water service.
Key benefits
- Laminate and resin matched to the connecting FRP pipe
- Elbows from DN10 to DN600 in 45° and 90°
- Pressure classes 0.6 / 1.0 / 1.6 MPa per catalog tables
- Socket, butt-and-wrap or flanged ends